How to Overcome the Leaking Roof

In the rainy season, one of the common problems at home is a leak on the roof of the house. The roof of the house that is leaking is definitely very annoying, the roof horses will increasingly porous, the problem of damaged ceilings, and water droplets can also certainly damage the items that are under the leaking roof.

Well, if that's the case you will be bothered by moving items such as furniture underneath. Every rain falls you need to accommodate the water droplets with a bucket or anything so as not to wet the other room. In conclusion, leakage on the roof should be fixed as soon as possible, because as we explained above, there are a lot of losses that we will get.

Here are the causes and ways to deal with a leaky roof:

The shape of the roof is too gentle / not too steep

The slope of the sloping roof or tile will cause water to not be gushing onto the ground quickly. Especially when heavy rains have a lot of water capacity. As a result, water still on the roof can flood empty spaces, the water will look for the slightest gap in the roof, especially in the connection / meeting of the roof cover (such as tile, asbestos, etc.) and cause leakage. A good slope angle of the roof is 30-40 degrees so that rain water can immediately flow downwards towards the drain.

Installation of roof coverings that are not good

So that the roof does not leak, roof coverings such as asbestos, tile or zinc alum must be properly installed, not to create gaps that can cause rain water to enter into it. Tile must be installed in the right way, so that between one tile with another tile can be locked together tightly. We recommend using tiles made of good quality materials, in addition to having a precise shape among other tiles, tile age is definitely more durable and not easily cracked or leaky.

Problems with gutters

Gutter is a channel that drains water from the surface of the roof to the drain. So make sure that the gutter is installed correctly, the connection to the gutter jurai also must be considered with the correct installation techniques as well. Use a chamfer with good quality ingredients, so that the chamfer can withstand the heat temperature. The size of the gutter must be in accordance with the flow of water to be flowed, meaning that the greater or wider the roof area, the gutter width must be adjusted. If the gutter is too small, this will make the water flow not smooth. And can cause leaks on the roof because water will enter between the tile.

There is a gap in the roof ridge

Check the ridge, if there is a leak or there is still a gap when the installation process. Because the ridge is the highest part of the roof, so this is where the flow of water originates. In this ridge, there is usually a type of knock tile and it is usually reinforced with mortar sand. If the composition of cement and sand is incorrect, this can result in a durable, cracked mixture that allows water to enter through cracks.

Trash on the roof

One way to deal with leaky roofs is to keep the roof of the house clean from rubbish. Garbage such as leaves is very often the cause of leakage. If a lot of rubbish is piled up on the roof or gutters, it will inhibit the flow of water to immediately flow down, and at the end spill over between the roof.